Showing posts with label Rigging. Show all posts
Showing posts with label Rigging. Show all posts

Tuesday, 28 March 2017

Major Project - Blanket Hand #1


I've got the creepy blanket hand finished and ready to go into the animation, here is how it looks and a test of how it moves. It uses a spline IK and a curve to translate the model and then the hand has its own rig. Next I will get it into the previs and start figuring out its movement!


Tuesday, 21 February 2017

Major Project - Shark Bed Rigging #1


Today I got the rig completed for the shark bed and added some rough textures, next up I need to skin it and then it will be ready for the animation.

Tuesday, 7 February 2017

Major Project - Bed Animation Test #1

Today I worked on getting the teeth made and attached to the rig, I did this using the rivet script and parenting the teeth to the locators (I had to scale constrain the rivets to the global move group to get it all scaling correctly). I then moved on to creating a glowing effect for the eyes, this was done using after effects, this is something that I will touch up on and adjust to create something more interesting, however for a first attempt I think it works quite well. I just need to add rim highlights to the model which Alan suggested creating on the texture.

Monday, 6 February 2017

Major Project - Bed Rigging #3

Today I work on getting the bed to blink and to open his mouth, I did this via a duplicate mesh and plugged it into the main as a blendshape. I used blendshapes to also reshape the mouth as it opens, this then all got plugged into the main mesh.


This is what the blink and mouth opening look like, I still need to add the contents of the mouth which is what I will focus on next. I'm not completely sure how to make the teeth follow the mouths movement, as it is driven from a duplicate mesh. I may need to use rivets or something similar to have them follow the geometry but I am unsure at the moment.

Friday, 3 February 2017

Major Project - Bed Rigging #2


I've got the basic skinning done for the bed, so he can now move slightly! I had a few issues that I've now fixed, I needed to adjust where the IK's were for the rig to work correctly. Next up I will be working on getting the eyes to blink and the mouth to open.

Thursday, 2 February 2017

Major Project - Bed Rigging #1

I started working on the bed's rig today, I did basically the same as what I did for the test except I added some extra joints and controls were necessary. Here is how the rig looks at the moment, I plan to use blendshapes for the mouth and eyes so that they can open.


I started skinning the legs, here's a little progress playblast:

Monday, 30 January 2017

Major Project - Bed Rigging Test #1


Following Alan's advice, I have put together a rough test rig for the bed. For the legs I used a IKSpringSolver, which has a handy little graph that can be used to dictate the weight it has on joints. I decided to use the flexiPlane that I've used throughout my project as the spine of the rig, that may be changed to a ribbon spine but at the moment it is doing the job required of it.

To test the rig out I put together a really quick animation, I wanted to see if the legs would bend correctly and the overall functionality of the rig. I noticed that the control that moves the leg joints for additional sculpting may need to be orient constrained to the leg joint as well as point constrained. This is because at the moment having only the point constraint limits the ability to sculpt as the geometry remains oriented to the leg.



Saturday, 17 December 2016

Minor Project - Dad Rigging #1


The Dad is rigged, I will be exporting the rig so I can reuse it for the mother when she is modelled. Next up I'll get him skinned and then some textures painted for him.

Sunday, 11 December 2016

Minor Project - Boy Face Textures #01


Today I worked on getting some face shapes done for the boy, I decided to create them in Illustrator as the smooth vector lines were something I wanted to achieve. There is still stuff to clean up and I need to create all of the Phonemes but it is really exciting seeing him come to life!

Thursday, 8 December 2016

Minor Project - Boy PJ's Rig Test


I've been trying to work on a way to rig the PJ's so that they can be deformed with the leg, this is my first test using a NURBs circle as a motion path with joints attached. It automates the deformation quite nicely and it's possible for me to add individual controls to control each joint separately. Below is an image of what the rig looks like so far it still needs skinning adjustments but the method seems to be relatively decent.


Friday, 2 December 2016

Minor Project - Boy Rigging #3


The boy's arms are now rigged, have squash and stretch and IK/FK functionality. Like the legs they have flexi-planes as part of the rig to add some extra control when it comes to skinning. Once I've checked over the rig to make sure there isnt any issues I can start skinning!

Wednesday, 30 November 2016

Minor Project - Boy Rigging #2


I finished off the leg rigging today and started on the arms, here are some of the various expressions/node editor work that I had to do to get the rig to be stretchy in both IK and FK mode.

Friday, 25 November 2016

Minor Project - Boy Rigging #1


Rigging is well underway, I decided to do the same rig that I used in my Adaptation B project, it will overall give me more control and exaggeration when it comes to animation. So far I've set up the spine, the neck, a temporary head joint and I'm halfway through the legs. Next I'll be working on FK controls and switching the visibilty between IK and FK controls, I'll also be adding flexiPlanes to the legs and arms to allow for better deformation.

Saturday, 9 April 2016

Adaptation B - Pop Princess Rigging #4

I've been working on the rig some more, here is a little progress update. The blink is now done, so that is one head blendshape finished and I am moving onto the other required blendshapes for more control of the face.


The rest of the model is also getting closer to being finished, there is still some extra joints that need to be set up for the bow and hair but rigging is getting closer to being completed.


The dress can now be controlled using either single controls or one that controls them all, it was done by creating a duplicate mesh and creating a rig for that which was then transferred to the dress via a blendshape (the image on the right is the duplicate meshes). The fingers are all working nicely and hold volume well with the double joints.

Saturday, 2 April 2016

Adaptation B - Pop Princess Rigging Progress #3


I finished off the arm rig today, next up is skinning however I still need to figure out the bow,dress,face and hair rig. The arm rig was much quicker to do than the leg rig as I had gotten used to using the node editor. The arms have a nice counter twist feature that will prevent the sleeve from twisting when the arm does, it also uses double jointed fingers which should help to keep volume when skinned.

Thursday, 31 March 2016

Adaptation B - Pop Princess Rigging Progress #2

The leg rig is finally finished and I will now be moving onto the arm rig, it took quite some time to get used to using expressions and the node editor however the result is very rewarding. Once skinned I will make some playblasts of the rigs features, it has been very interesting to create so far!


The left side of the Node editor deals with making the leg stretchy correctly, it took a while to set up and to learn how each node worked. The right side deals with the flexiPlanes ability to twist successfully with the rig, it seems like the flexiPlane will be useful for keeping volume in the mesh as it deforms and creating some nice stretching/twisting.

the tutorials can be found here

Tuesday, 29 March 2016

Adaptation B - Pop Princess Rigging Progress #1

I decided that I wanted to try something different from Alans tutorials for rigging, so I started a course on digital tutors called advanced character rigging. So far it has been pretty straight forward and I have picked up some useful scripts and tips that should make rigging slightly easier in the future (hopefully), this rig uses a lot of flexiPlanes which are very similar to the ribbon spine, although it seems to be slightly more detailed.

Here is a playblast of the flexiPlane bound to a low res cube, it has lots of squash and stretch potential and the ability to turn that attribute on and off, also as the flexiPlane is a modular component it only had to be made once and can be added to the rig multiple times.


I am currently working on the leg rig which has the option to switch between IK/FK, so far it is going quite smoothly but there is a long way to go yet.


The course doesn't include facial rigging so I will have to combine it with another course to have a complete rig, I am excited to bring my character to life.

http://www.digitaltutors.com/tutorial/879-Advanced-Character-Rigging-in-Maya

Wednesday, 16 December 2015

Pipeline 1 - Character Rigging Part 1


I managed to some how break one of the character legs during skinning, so the leg would straighten whenever I applied an IK to it, after a bit of exploring I found a fix for it. I had to set the preferred angle of the joint and that remedied the issue. So after a bit of fighting the lower half of the character is rigged.